Stop with Confidence: Expert Brake Service
Our ASE-trained technicians service pads, rotors, calipers, brake fluid, and ABS components on most makes & models. We’ll recommend parts that fit your vehicle and budget, then road-test and torque to spec—every time.
What’s Included
- Replace brake pads with OEM-quality or premium options
- Replace or machine rotors as appropriate (measure to spec)
- Clean & lube slide pins; install required hardware/shims
- Brake fluid test; flush & bleed system if needed
- Inspect calipers, hoses & lines; check for leaks
- Road test & torque wheels to manufacturer spec
Recommended Intervals
Inspect brakes at every oil change; replace pads typically at 3 mm or less and rotors when below minimum thickness. Brake fluid flush every 2–3 years (or per owner’s manual).
Signs You’re Due
- Squealing or grinding while braking
- Vibration or steering wheel shake
- Soft/low pedal or longer stopping distance
- Vehicle pulls to one side under braking
- Brake/ABS warning light on
- Visible scoring or blueing on rotors
Related services: Wheel Alignment, Tires, Oil Change.
Brake Service FAQs
How long do brake pads last?
Typical range is 30k–60k miles depending on driving and vehicle. We measure pad thickness and rotor condition during every inspection.
Do you use OEM parts?
Yes—OEM-quality and premium aftermarket options are available. We’ll recommend the best match for your vehicle and budget.
When should brake fluid be flushed?
Every 2–3 years (or per owner’s manual). Moisture-contaminated fluid reduces braking performance and can damage ABS components.
Can you diagnose ABS lights or pulsation?
Absolutely. We scan for fault codes, test wheel-speed sensors and valves, inspect rotors for runout, and recommend the right fix.